- Видео 47
- Просмотров 629 484
sondroyo
Добавлен 29 сен 2006
Welcome to Sondroyo. This website presents both personal and company projects. Amazon affiliate links are in use.
Nasty Brown Bleed Through White Paint - Will Kilz Restoration Work? You Won't Believe the Result!
I used 2 coats of Kilz Restoration - provided for free by Kilz because I was so frustrated - to spray paint a yellow/brown bleed through white paint issue in a 1940s home.
I've worked on 1920s construction previously and using the cheap stuff was not an issue. It could be that the previous homeowner used a lot of oil based furniture polish on the wood trim and doors. I'm pretty sure it was an oil based issue, because Kilz low odor did an initial good job of covering the problem until a latex topcoat was applied.
Using an oil based topcoat is not an option anymore due to price & availability, and for good reason. This is a better option, low VOCs, not flammable when spraying. Good work Kilz ...
I've worked on 1920s construction previously and using the cheap stuff was not an issue. It could be that the previous homeowner used a lot of oil based furniture polish on the wood trim and doors. I'm pretty sure it was an oil based issue, because Kilz low odor did an initial good job of covering the problem until a latex topcoat was applied.
Using an oil based topcoat is not an option anymore due to price & availability, and for good reason. This is a better option, low VOCs, not flammable when spraying. Good work Kilz ...
Просмотров: 8
Видео
Tree Removal Party
Просмотров 1853 месяца назад
A damaged set of tall pine trees is removed from a yard using a crane and a chipper.
Fixing Steam Air Vent Hole (Bushing Stuck and Rusted)
Просмотров 1366 месяцев назад
Steam heat likes to rust everything that isn't copper or brass. This results in old steel bushings (1/4" to 1/8") getting stuck, and if the threads are degraded you have a problem on your hands when you try to replace the air vent. This video shows how to remove the old bushing with a drill and tap. These NPT kits are easily available on Amazon and usually at your local plumbing store. They are...
Fixing Kitchen Problems with Tools Part 3: Measuring Cup Label
Просмотров 278Год назад
In this episode, I remove one of those really sticky labels from a new kitchen implement using a paint scraping razor. It is very successful, except for 1 problem.
Rescuing a Snake from a Spider
Просмотров 87Год назад
A spider captures a snake. What happens next will surprise you. #snek
Fixing Kitchen Problems with Tools Part 2: Chicken Bag Zip Tie
Просмотров 242 года назад
In this episode, I open a bag of frozen chicken that has been zip tied closed using my Romex wire snips. It is very successful, except for 1 problem.
Fixing Kitchen Problems with Tools Part 1: The Mayo Tab
Просмотров 312 года назад
In this first episode, I open a mayo container seal using a screwdriver and vice grips instead of the usual way. It is very successful, except for 1 problem.
StreamLabs Home Water Monitor Install
Просмотров 2932 года назад
This is an overview of a field install of the StreamLabs home water monitor. It appears to use 2 contacts enclosed in a wifi/power box that you zip tie to the main water line in a standard residential setup. Amazon affiliate link to purchase (they should cost around $150): amzn.to/3KwXCeS A number of people reported having trouble with the wifi but this is a just a typical 2.4 GHz only type sit...
Goldfish Mega Bites
Просмотров 4862 года назад
A brief review of the millennial targeted food called Goldfish Mega Bites. It is goldfish but they increased the size of each fish significantly. Hope you figured this out. Millennials are yet another demographic group born between early 1980 and late 1990. The millennial group enjoys wine with friends, eschewing gluten, eating processed food similar to what was put in their school lunchboxes, ...
Sharpening a Knife with ASMR
Просмотров 312 года назад
In this video, I provide a brief overview of how to sharpen a knife with a 2 stage Wüsthof hand sharpener. It apparently can be considered ASMR for people who like the sound of nails scraping the chalkboard, so enjoy.
Treating a Scar - Mederma, ScarAway, and Glycolic Acid 7%
Просмотров 6242 года назад
Treating a Scar - Mederma, ScarAway, and Glycolic Acid 7%
RAK Wireless Power Line Communications
Просмотров 1593 года назад
RAK Wireless Power Line Communications
Dishwasher Won’t Start, Flashing Start Light
Просмотров 130 тыс.3 года назад
Dishwasher Won’t Start, Flashing Start Light
Switching from G Wire to C Wire (Sensi ST55)
Просмотров 4 тыс.3 года назад
Switching from G Wire to C Wire (Sensi ST55)
Fixing DeWalt DWD110 Drill that Won't Turn On / Sometimes Turns On
Просмотров 8 тыс.3 года назад
Fixing DeWalt DWD110 Drill that Won't Turn On / Sometimes Turns On
S-Curve On Florida I-75 (Alligator Alley)
Просмотров 2843 года назад
S-Curve On Florida I-75 (Alligator Alley)
Just Crack an Egg | Denver Scramble Kit
Просмотров 2423 года назад
Just Crack an Egg | Denver Scramble Kit
Going through the airport under threat of SARS2/Coronavirus
Просмотров 684 года назад
Going through the airport under threat of SARS2/Coronavirus
Poison Ivy Treatment with Methylprednisolone
Просмотров 4,9 тыс.4 года назад
Poison Ivy Treatment with Methylprednisolone
Adding a Plug (on the other side of the wall)
Просмотров 72 тыс.4 года назад
Adding a Plug (on the other side of the wall)
Graco TrueCoat 360 VSP - Setup and Cleanup
Просмотров 94 тыс.5 лет назад
Graco TrueCoat 360 VSP - Setup and Cleanup
Sorry for the clickbait title, I thought it was funny.
What did he screw the box into? Lol the drywall? That's no good.
It's an old work box. Old work boxes have 2 little flaps that grab onto the rear of the drywall when screwed in.
Are you chewing on taffy or something? Goddamn I couldn’t even pay attention
I used to be very into gum. Filthy habit. The dentist bills were too high so I stopped. Edit: this is obligatory. ruclips.net/video/nMBD2nh_mMs/видео.html
Mine keeps flashing number 2 and turning on and off.
4 years later and we still looking for this info, thank you
Thank you for this video. Was able to fix my dishwasher without having to go buy a new one.
What have been a fine video but you are f*cking chomping on something. Jesus Christ
Great video. Can you store paint in this overnight? My typical jobs are cabinets, so I do 1st coat on one side of door, then 6 hrs later I do 2nd coat other side of door, then the next day I repeat for the 2nd coat. Can I leave paint in there or will I have to clean it out 4 times?
I would not recommend leaving it alone more than 10 minutes, maybe 30 minutes if the spray tip area is wrapped with a wet paper towel. The spray tip area is the issue - if this area dries it will either get clogged or otherwise impact the smooth spraying abilities of the tool. You might be able to get away with cleaning just the spray tip area between 6 hour interval sprays if there is no other mess, but at your own risk (let everyone know how it works!).
@sondroyo I actually just left it overnight last night with spray tip turned in the closed position and everything under pressure and the gun in a plastic bag. Sprayed fine today. I just know I'll have to do a thorough job of cleaning with mineral spirits when I'm done with this color. Not sure how long this method will work longterm but with the type of work I do it isn't practical for me to use if I cannot do this. Will report back if things ever give out prematurely
Thanks for sharing. As long as it sprays evenly, you might be good to go. Serious clogs clear out pretty easily with hot water.
I think I broke ours trying to fix it😂
Oh no!
Still not much improved
If anything it got the healing process going. It's all disappeared now.
@@sondroyocan u put the updated video showing the current progress
Good example of how NOT to wire a receptacle.
Call out anything wrong you see that isn't in the comments already. I'm way better at this stuff now.
Huge thanks dude, inherited the dud from the prior home owners.
What happens if you’ve already paid $30 and/or a pet fee to check your bag before you arrived at the gate and they’ve decided to select you for this? Do they refund you the $30 and pet fee, or do they keep it on file so you don’t have to pay it again when you board the later flight? And what happens to your checked bag? Does it arrive at your destination before you and hopefully is held in a secure location until you arrive later, or is it pulled out of the baggage cart and given back to you before it is loaded onto the plane?
There is always a conversation at the counter regarding minor details (but you must speak up). The ramification for checking bags or bringing pets on the plane is less flexibility with regard to vouchers. They are looking for people who have maximum flexibility. American generally will route checked luggage to the final destination without any additional trouble as long as it is a domestic flight. Checked luggage arriving before you gets held at the baggage claim counter, which is watched by staff.
It’s too bad it’s a flight voucher and not actual cash?
Typically a voucher. You would have to exert a lot of pressure, and be the only one willing to give up their seat, to get cash.
Thank you! This tutorial helped me set up my 1950s one!
Hello, did you possibly post a Conext Gateway bug on DIYsolarforum ? If yes, I responded in that forum with a fix. If no, I apologize, I was just going by the identical user ID in each. :)
that is a non-combustible foam product that will not readily burn or support combustion. additionally it provides thermal and sound insulation. combined with the drywall this will meet the fire code requirement between units. it extends up above the ceiling line as that is a requirement that the firewall runs through the attic to the roof
I don't think that is foam, it's a gypsum product. As the project has progressed, it really looks like they are just using it on the first floor next to the garage. We will see.
Zero lot line residental requires 1.5 hr rated firewall. 5/8" drywall is generally rated for 45 minutes.
I'm a big dude and we have this same 2022 dishwashing machine I need to really push hard to get it started..annoying
Have the hard to start issue, AND mine continuously stops mid-cycle, requiring the Start button to be pushed multiple times in order to get it to complete a single cycle. Never again.
Mine has been blinking blue for like an hour. Is it bricked?
You're not installing a plug. You're installing an electrical outlet or receptacle. The two or three pronged plug will have an electrical cord attached to it that goes to a light fixture or some electrical motor, such as a fan, grinder, or vacuum; or to a radio, TV. electrical clock. etc.
good video. Just what I needed.
“It’s not beeping”… as the tester beeps.
Ha. I love how every detail of this video has been analyzed. For curious viewers, it would be a constant beep-beep-beep-beep if a circuit was present. The single beep just tells you that it has a battery.
How do you clean the screen
This would have been the perfect video if you hadn't glossed over and fast forwarded through the most important part! You can't tell what you connected to what or how you extended the ground.
That's kinda basic electronics/wiring. So tbh, if you aren't familiar with how you would do the connections, you should maybe let an experienced person do that part just to be safe.
I have 3 access Points. 1st point is connected to my home router. When I perform the factory reset, do I unplug the other 2 points or leave them plugged in?
May you please let me know how do you claim the vouch ?
This video is just how to submit your name for consideration. They will call your name at the gate if they actually want to take you up on the offer. If you already received a voucher you can enter it in the payment stage of buying a ticket on AA.com.
Those Graco guns are just frustrating, and most of the time, it takes longer to get it to work. I'm just getting a good Corona brush and a nice roller.😂
Really only worthwhile for >1000 sq ft. The finish quality is better than brushwork though.
Very helpful, thank you.
Esto me sirvió mucho. Gracias.
Thank Sondroyo for the info. This Frigidaire dishwasher is a really bad machine. It happened because we trust Home Depot for many hardware needs. when we need to return something in the rest of the store there is no problem. However, for electrical appliances Home Depot is not to be trusted. The appliances are not good quality and the seller does not tell you that their policy for returns if we do not want it is 48 hours. I bought a machine and its guaranty. It was so hard to turn it on and the door so heavy too open that I considered that garbage. Home Depot let it on my own to deal with the guarantee company that did not work.Conclusion: I had to submit a dispute. The money was tied to Home Depot for 3 months; At the end of the bank dispute, I received the money but no one took the machine out of my home. It is so bad that as a gift it is still a pain to use it.Shouldn't I complain? Well, customers deserve better appliances, not an irresponsible seller. America should provide employment and pay workers in our country for making better products and fixing unemployment rate; Instead of receiving the exploitation of bad foreign countries' appliances and parts that try to ruin the USA.
I got lights and power but won't start. I hear it trying to click over, but nothing. I tried to shimmy thr latch with cardboard to push down on the latch but nothing. If I move to front door side to side I hear it clicking trying to start but nothing. Any ideas?
I wonder if the valve which opens to allow water in has broken. Let us know if you figure it out.
@@sondroyo I actually tried everything and it lasted 12yrs. I bought a whirlpool dishwasher
I'm guessing bidet outlet 💩🚿
Toilet paper is a total scam.
😂😂that’s exactly what I’m looking to install!!
Mine starts a red blinking light won’t do anything else
Thank you so much for the helpful tip it
Thanks for the video. I have this dishwasher and it is nearly impossible to get it to turn on. My cancel button doesn't work at all. It runs the full cycle and turns itself off. I am not happy with it. It has a one-year guarantee from the manufacturer. I'll see if the store has options to return it.
how does one remove this panel. Having same issue, but can't see any means to remove the panel and check the clips. TKS
There are a series of torx screws around the inner edge of the door.
My brand new Frigidaire will not wash the dishes at all even though it seems to run through a normal cycle.
The washing arm might not be spinning.
So you need to push the panel inside first? Question to anyone...
It's likely you just need to press harder than you ever thought possible on the buttons. I mostly opened up the machine to figure out what was going on, and it didn't seem like the circuit board was seated very well.
@@sondroyo Our new dishwasher is from Lowes, can't find a brand name, but having same issues. This is about a six months old. Last washer lasted less than a year, plastic gear in pump went out. So now we have this pc of crap....The irony, I bought this house had a Montgomery Ward dishwasher, 20 years old at least. Today everything is junk.
@@StephenZ827 It's frustrating because it is actually not hard to clean/restore the 20 year old gear. It just looks dated.
Thk u. Very helpful
Omg thank you! I hate fridfedare
seems to me that the hooks are going the wrong way?Hook facing right not left.
Correct, some are the wrong way, they should go clockwise around the pole so that they are drawn into the pole when tightened.
Great video. Right to the point and exactly what I was looking for. 👍🏼
Have to white knuckle it to get it to work
My landlord got us a new dishwasher n it happens to be this exact piece of CRAP!!!! Cheap Chinezze garbage . Americans need to stop allowing cheap Chinezze junk to be sold In our country !! My problem is this piece of crap wont latch when closing it
Just watched your video cuz my dishwasher was driving me insane. Got it running. Thanks. :)
Thank you
Mine sucked. It stopped spraying after 5 min
We got the same model but the white one and it starts up. Fills up the water but it never starts the wash cycle it’ll sit quiet then eventually drain the water back out and sit there quietly again just getting extremely hot. This happened to both units we ordered, same dishwasher, idk maybe they just had a bad batch go out for sale and we got unlucky? This can’t be normal though
Mine is doing this now four years later. It’s probably time for an upgrade. Appliances don’t last long anymore